Hey men in Denver, Colorado welcome back! Today, I actually have a Husqvarna garden mower with a Briggs engine at the floor. The problem with this lawn mower is that it won’t start on its personal. You have to spray some carb cleanser or brief begin inside the carb to get it going.
So, what I need to do these days is undergo the steps of diagnosing and solving a lawn mower that comes into your save, or in case you’re a house owner, a garden mower that you’ve positioned away and visit use, but it gained’t begin.
I’ll take it outdoor, begin it up, and show you guys what it does with the quick begin. Once you spray the short begin or the carb cleaner within the carb, it remains running. The first factor you need to do whilst you get a garden mower that doesn’t want to begin is to take the air filter out off. On this one, you just pop the quilt off, and the filter will come off.
A short manner to diagnose if it’s a spark issue or fuel-associated problem is to do like I’m doing right here. Like I told you guys, if I spray a few carb cleaner, it’ll run and maintain going for walks. Now, I’m not going to spray anything within the carb, and this machine will now not start. So, it could seem like a grimy carb, however the fact that I sprayed carb cleanser in there and it saved jogging suggests that it’s not the problem.
It’s obviously no longer a spark difficulty, so we’ll look at in addition to parent out what it’s miles. The first component I’m going to do now could be remove the air filter out bracket. I’ll want an 8 millimeter and 7-millimeter socket to cast off the 4 bolts. Okay, allow’s get these bolts off.
I can already see the problem. The choke lever is getting stuck on the metal plate. Now, that is a trouble I’ve seen pretty a piece on those Briggs engines with the identical carb. Sometimes, you may take off all the covers, and by the time you are taking the duvet off, the lever is within the right role.
Always look within the carb first earlier than taking it off. If you spot that the lever is extensive open, so that it will let you know right away that this is the problem. The true information is in case you’re facing this issue, it gained’t price you whatever to restore it. There are quite some one-of-a-kind methods to restoration this, but the simplest way is to pry this metallic plate as far to the the front as feasible.
It will by no means get stuck again. The handiest trouble with this is while you go to put returned the air clear out bracket, the holes may not line up. There are a few alternatives to deal with this. You can drill out a hole as close to the brink as you could, supplying you with more wiggle room to line up the bolt to the threads.
Another way is to take off some of the fabric on the stop of this arm; all you would have to take off from the plastic is set 1/eight, and you may just use aspect cutters to do that. This might be the easiest way, and also you received need to realign or drill any holes.
Usually, I’m capable of escape with the aid of simply bending the metallic plate toward the the front. Still, in this case, it changed into rubbing pretty a piece, so I didn’t need to send this out to a purchaser with the identical difficulty coming up in a few weeks.
Okay, allow’s get this aspect back together, and optimistically in Denver Metro Colorado.
One comment
Comments are closed.